-
|
.
|
| Ciao
Ho anche guardato le cellule alternativamente molto tempo fa.
e visto che secondo me solo il Winston
consente una corrente di scarica di 3C
Vivo nella zona di montagna
da quando guido fino a 10 minuti con 250-300A
Molte cellule possono farlo solo impulsivamente senza essere danneggiate
L'LFB280AHK può fare solo 0,5C (140 A) |
|
-
|
.
|
| | the relay 8 is behind the touch |
|
-
|
.
|
| We have been using the balancers for over a year and
even with measurement errors I did not find any problem.
I am aware that while driving with high current is pushed into cell 15 but the car drives maybe 1 hour a day and stands 23 hours
on the whole, however, the old battery has become better since the installation of the balancer |
|
-
|
.
|
| Hello I am of the same opinion,
with Tomas we noticed that there is a wrong measurement in cell 15.
here is measured via the 35mm2 cable from +Z15 to +Z14
if now 200-300A flow, we have an incorrect measurement with the Equilazer which will probably be corrected at the BMS
(BMS definitely not available, but can also be measured with a measuring device) |
|
-
-
|
.
|
| | I did not see this at 3 Tazzari that must be retrofitted because the silent blocks were defective |
|
-
|
.
|
| QUOTE (charliefdt @ 19/9/2022, 10:08) thank you! Any chance you could share the schematics? I have the pdf "Manualedi OfficinaZeroClasic" but not "Schema elettrico" that was supposed to be "in allegato" ...
I found it on this site: https://www.selidori.com/tech/index.php?ri...&cercain=ttldsc , it should be the last file.
Probably found this link on the forum years ago. |
|
-
|
.
|
| QUOTE (charliefdt @ 19/9/2022, 08:23) The question here is: Do you guys have dimensions for all these silent blocks I will need to replace? I can of course measure them myself but i was hoping to have an early start and order the parts before I have the chance to take everything out and measure myself ...
These are the dimensions of our old ones: Inner diameter: 12mm with width 30mm, outer diameter: 40mm with width: 25mm. (The central part is wider).
We couldn´t find any online with the right measurements so we bought these: from auto-doc.it
They are a bit stronger and a bit wider, so we had to use longer screws on the lateral two and had to trim the sides of the central one. |
|
8 replies since 31/7/2022
.
